Oil skimmer system “Technoskim-1” manufactured by the company «Ecoservice Oil» is designed for oil/petroleum products skimming from water surface (capacity – up to 15 m³/h).
 
  Skimmer system «Technoskim-1» allows to use interchangeable oil recovery cartridges of oil/brush-, drum- or disk-type. All cartridges are made of polypropylene. 
  Optimal choice of the skimmer intake unit provides the most effective skimming of oil/petroleum products of variable viscosity.
  The skimmer capacity varies according to the gathered oil/petroleum products viscosity and the type of applying intake unit. The maximum skimmer capacity for average viscous oils is reached when brush-type of intake unit applying.
For some operations including pumping oil from the reservoir it is possible to use dischargeable pump that can work without skimmer floating head unit .
 
  Ranges of application of the oil-skimming device: efficient recovery of oil contained slick formed after accidents on river areas, lake areas and at their port waters (on-loading terminals, oil-field equipment, main underwater oil pipeline passages etc.)

• Skimmer floating head unit with built-in hydraulic motor;
• Plug in hydraulic centrifugal pump (mounted on the oil-recovery head unit);
• Brush-type intake unit (changeable);
• Drum-type intake unit (changeable);
• Disk-type intake unit (changeable);
• Hydraulic power unit;
• Set of unloading hoses;
• Set of hydraulic hoses;
• Set of spares.

Description	Ratings
Oil skimmer capacity, m3/h	Up to 15
Water maximum content in gathered oil, less then	5 %
Type of the skimmer intake unit	Brush, drum, disks
Quantity of oil skimmer head intake units, pcs	1
Intake unit speed, rpm	5-100
Intake unit drive	hydraulic
Type of discharge pump	hydraulic
Overall dimensions of skimmer floating head unit, mm	1350 X 1380 X 520
Weight of skimmer floating head unit, kg	50
Hydraulic power unit capacity, kW	7,4-8,1
Power unit type	Diesel, petroleum or electric engine
Power unit weight, kg	125-145

 Vacuum oil skimmer “Vac-1” is designed for recovery of oil and other contamination from water surface and from the ground.
  Thanks to the compact design and low weight of the skimmer it can be efficiently used in remote areas, where it is not possible to deliver heavy equipment.
  The design of the skimmer allows gathering oil in circle steps: filling of the hopper – discharge – refilling. Recovered substance can be pumped or inside the 250 liter capacity hopper or in standard 200 liter steel drums.
  Filling and discharging the hopper is carried out with one pumping power plant block. When filling the hopper the vacuum pump creates considerable vacuum in the whole system, while discharging the hopper the vacuum pump works in a reverse way and creates necessary overpressure in the hopper.
  Considerable vacuum created in the system by special vacuum pump allows recovering the substances of rather high viscosity, inclusive oil residues with considerable content of concrete particles (size up to 30 mm).
  Maximum vacuum oil skimmer “Vac-1” capacity is 10 m³/h. 

• pumping power plant block;
• removal vacuum top;
• hopper with discharge flange;
• intake attachment;
• set of intake hoses with quick couplings type “camlock”;
• set of force hoses with quick couplings type “camlock”;
• set of discharge hoses with quick couplings type “camlock”;
• protective pumping power plant block cover;
• transport package (plywood box).

 

Description	Ratings
Type of the pump	Two-rotor vacuum
Oil skimmer capacity, m³/h	Up to 10
Maximum vacuum, atm	-0,8
Type of pump drive engine	Diesel/gasoline/electric
Pump drive engine capacity, kW	Up to 5
Dimensions of the vacuum pump with drive, mm	1070 x 750 x 1000
Vacuum pump weight, kg	117
Dimensions of the reception hopper, mm	Ø 900 х1650
Hopper weight, kg	60

 “Ecoservice Oil” company offers a universal oil-gathering device “Unumok”, designed both for collecting oil from the water surface and for pumping oily bottom sediments.
 The “Unumok” device is based on the submersible pump, which is designed for pumping high-viscosity liquids with a high content of mechanical impurities.
 The head floating part of the Unumok oil gathering device is equipped with a special hydraulic cylinder, with the help of which it is possible to remotely (from the control panel of the power hydraulic unit) adjust the level of the drain threshold. Such an adjustment allows only the oil layer to be collected from the water surface and exclude water from entering the intake.
 The “Unumok” design allows the inner pump to be removed from the floating head and used independently as a submersible pump.
 The recommended field of application of the “Unumok” oil skimmer is the operational collection of spilled oil and oil products in case of emergency spills on rivers, lakes, water areas of oil terminals, elimination of sludge pits, pumping of oily bottom sediments from sedimentation ponds, etc.

• The head floating part of the oil skimmer with a threshold intake device;
• Submersible pump;
• Diesel-hydraulic power unit;
• Unloading hose set;
• Set of hydraulic hoses;
• Protective cover for diesel-hydraulic power unit;
• Set of floats for hydraulic and discharge hoses;
• Spare parts;
• Transport packaging (plywood boxes).

Description	Ratings
Oil skimmer intake type	threshold
Oil skimmer performance, m3/h	≤30
Range of dynamic viscosity of the pumped substances, cSt	from 0 to 106
Unloading pump type	hydraulic vertical screw pump
Dimensions of the head floating part, mm	1800 х 1800 х 1400
Maximum draft of the head, mm	250
Maximum immersion depth of the DESMI DOP-160 pump, mm	10000
Weight of the head floating part, kg	95
Diesel-hydraulic power plant power (driven from the “HATZ” diesel engine), kW	27
Diesel-hydraulic power plant weight, kg	420

  Oil skimmer system “Technoskim-P” manufactured by the company «Ecoservice Oil» is designed for skimming of oil and petroleum products skimming from water surface (capacity – up to 30 m3/h).
Recommended ranges of application of the “Technockim-P” oil skimmer are: efficient recovery of contained oil slick formed in river areas, lake areas and at the port waters (on-loading terminals, oil-field equipment, main underwater oil pipeline passages).
The “Technoskim-P” floating head unit is equipped with hydraulic system that controls draft of weir in remote mode.

• Skimmer floating head unit;
• Outer unloading pump;
• Hydraulic power plant with engine, gasoline engine or electric motor;
• Set of discharge hoses;
• Set of hydraulic hoses;

Description	Ratings
Oil skimmer capacity, m3/h	up to 30
Type of the skimmer intake unit	sill-type
Control of discharge threshold sinking level	by means of hydraulic cylinders
Type of discharge pump	outer
Dimensions of skimmer head, mm	1700 × 1650 × 950
Weight of skimmer floating head unit, kg	45

Oil skimmer system «Technoskim-M1-60» manufactured by the company «Ecoservice Oil» is designed for oil recovery from water surface (capacity – up to 60 m³/h). Oil skimmer system «Technoskim- M1-60» allows to use interchangeable oil recovery cartridges of brush-, drum- or disk-type. All cartridges are made of polypropylene.
 Optimal choice of the skimmer cartridge provides the most effective oil recovery of
various viscosity. The skimmer capacity varies according to the recovered oil viscosity and the type ofused cartridge. The maximum skimmer capacity for medium viscous oils is reached with cartridges of brush-type. For some operations including pumping oil from the reservoir it is possible to usedischarge pump that can work without skimmer head.
 Range of application of the oil-skimming device: efficient recovery of oil contained slick formed after accidents on river areas, lake areas and at their port waters (on-loading terminals, oil-field equipment, main underwater oil pipeline passages etc.)
 

• Skimmer head with built-in hydraulic motors;
• Plug in hydraulic centrifugal pump (mounted on the oil-recovery headunit);
• Brush-type cartridge;
• Drum-type cartridge;
• Disk-type cartridge;
• Hydraulic power pack;
• Set of discharge hoses;
• Set of hydraulic hoses;
• Set of spares.

Description	Ratings
Oil skimmer capacity, m3/h	Up to 60
Type of the skimmer intake unit	Brush, drum, disks
Quantity of oil skimmer head intake units, pcs	4
Intake unit speed, rpm	5-100
Overall dimensions of skimmer floating head unit, mm	1965 X 1965 X 825
Weight of skimmer floating head unit, kg	163
Draft of skimmer floating head unit, mm	400
Intake unit speed, rpm	5 – 100
Hydraulic power unit capacity, kW	21